Teltonika Router

Device Information:

Summary

Purpose: Industrial cellular router with GPS tracking, digital I/O monitoring, and event management for remote connectivity.
Outcome: Cloud integration with GPS location tracking, cellular connectivity status, I/O event monitoring, and arm/disarm control.
Audience: Technical Installers / Field Engineers / Support

Aspect	Details
Setup Time	15-20 minutes
Difficulty	Intermediate
Setup Method	Serial number registration + custom HTTPS receiver URL configuration
Connectivity	Cellular (LTE/4G/5G), Ethernet, Wi-Fi (model-dependent)
Integration Type	HTTPS-based data transmission with custom receiver URL
Ports Required	HTTPS (443) outgoing
Key Features	GPS tracking, location updates, digital I/O monitoring, arm/disarm, event notifications
GPS Capabilities	Real-time location tracking with configurable update intervals
I/O Monitoring	Digital input/output monitoring for sensors and control devices
Ideal Use Cases	Remote sites, asset tracking, vehicle tracking, backup connectivity, IoT device networking

Before you begin, ensure you have:

Type: Industrial Cellular Router - GPS Tracking & IoT Connectivity
Discovery Protocol: Serial number-based registration
Event Types: GPS location updates, device status changes, digital I/O events, connectivity loss, arm/disarm state changes, cellular signal strength
Network Requirements:
- Connectivity: Cellular (LTE/4G/5G primary), Ethernet, Wi-Fi (model-dependent)
- Outgoing: HTTPS (443) to GCXONE custom receiver URL
- GPS: Active GPS signal required for location tracking
- Bandwidth: Minimal (periodic GPS updates and I/O events)
Known Considerations:
- Serial number registration - Device serial number required for GCXONE registration
- Custom receiver URL - HTTPS URL from GCXONE must be configured in GPS service settings
- GPS service mandatory - GPS service must be enabled for location tracking
- GPS antenna - External GPS antenna must be properly connected and positioned
- Cellular connectivity - SIM card with data plan required for cellular models
- Digital I/O - Configurable digital inputs/outputs for sensor and control integration
- Arm/disarm functionality - Remote control of device operating modes
- Event-driven updates - Configurable GPS update intervals and I/O event triggers
- HTTPS communication - Secure data transmission to GCXONE platform
- Industrial design - Ruggedized for harsh environments and outdoor deployment

Feature Category	Feature	Status	Notes
Discovery & Setup	Serial Number Discovery	✓	Manual registration via serial number
	Custom Receiver URL	✓	HTTPS-based data transmission
GPS Tracking	Real-Time Location	✓	GPS coordinates with configurable intervals
	Location Updates	✓	Periodic or event-driven updates
	GPS Service	✓	Configurable GPS settings
Connectivity	Cellular (LTE/4G/5G)	✓	Primary connectivity (model-dependent)
	Ethernet	✓	Wired connectivity option
	Wi-Fi	✓	Wireless connectivity (model-dependent)
Events & Monitoring	Event Detection	✓	I/O events, connectivity changes
	Device Status	✓	Online/offline, signal strength
	Arm/Disarm	✓	Operating mode control
I/O Capabilities	Digital Inputs	✓	Sensor monitoring (door, motion, etc.)
	Digital Outputs	✓	Device control (relay, alarm, etc.)
	I/O Event Triggers	✓	Configurable event notifications
Advanced Features	HTTPS Communication	✓	Secure data transmission
	Cellular Signal Monitoring	✓	Signal strength and quality tracking
	Failover/Backup	✓	Multiple connectivity options
	Remote Configuration	✓	Web-based management interface

Legend: ✓ Supported | ○ Partial Support | ✗ Not Supported

Integration Highlights:

GPS tracking - Real-time location updates with configurable intervals for asset and vehicle tracking
Industrial cellular connectivity - LTE/4G/5G primary connectivity with failover options
Digital I/O monitoring - Monitor sensors (door contacts, motion detectors) and control devices (relays, alarms)
HTTPS-based integration - Secure data transmission via custom receiver URL
Serial number registration - Simple device onboarding using device serial number
Arm/disarm control - Remote control of device operating modes via GCXONE
Event-driven architecture - Configurable triggers for GPS updates and I/O events
Multi-connectivity - Cellular, Ethernet, Wi-Fi for redundancy and flexibility
Industrial design - Ruggedized for harsh environments and outdoor deployment
Minimal bandwidth - Efficient data transmission for cellular cost optimization
Remote management - Web-based configuration interface for settings and troubleshooting
Ideal for remote sites - Cellular connectivity enables deployment in locations without fixed infrastructure

To configure Teltonika Router with GCXONE:

Obtain Device Serial Number - Login to Teltonika router web interface → Status → Device, copy serial number
Add Device in GCXONE - Navigate to Configuration App → Site → Devices → Add → Teltonika, enter serial number and save
View Device Information - Click "View" button to verify device registration
Obtain Custom Receiver URL - Click "Edit" button in device configuration, copy "Teltonika Custom Receiver URL"
Configure GPS Service - In Teltonika router, navigate to Service → GPS
Configure HTTPS URL - Go to HTTPS tab in GPS settings, paste custom receiver URL from step 4, save configuration
Verify GPS Antenna - Ensure GPS antenna is properly connected and positioned for signal reception
Configure I/O Settings (if applicable) - Set up digital inputs/outputs for sensor and control integration
Verify Integration - Check GPS location data in GCXONE, test I/O event notifications, confirm device status is online

Estimated setup time: 15-20 minutes

For detailed step-by-step instructions with screenshots, see the Installer Configuration Guide.

Need Help?

If you need assistance with Teltonika Router integration, check our Troubleshooting Guide or contact support.