Skip to main content

Viasys/ShieldBox Cloud NVR

Device Information:

  • Device: Cloud NVR (Network Video Recorder)
  • Vendor: Viasys / ShieldBox
  • Model: Cloud NVR Series
  • Firmware: Cloud-managed firmware
  • Platform: GCXONE
  • Doc Version: 1.0.0

Summary​

  • Purpose: Cloud NVR with simplified deployment and minimal infrastructure for small to medium security installations.
  • Outcome: Cloud integration with live video, playback, timeline, and events—no port forwarding or complex configuration.
  • Audience: Technical Installers / Field Engineers / Support

Prerequisites​

Before you begin, ensure you have:

  • Viasys/ShieldBox Cloud NVR hardware or cloud account
  • Network connectivity with internet access for NVR/cameras
  • GCXONE account with device configuration permissions
  • IP cameras connected to cloud NVR (via local NVR or cloud service)
  • Viasys/ShieldBox cloud account credentials
  • Firewall allows outbound HTTPS (port 443)

Device Profile​

  • Type: Cloud NVR (Network Video Recorder) - Cloud-Based
  • Discovery Protocol: Cloud-based discovery via Viasys platform
  • Event Types: Motion detection, video analytics, camera disconnection, storage alerts, system events, alarm inputs, intelligent event detection
  • Network Requirements:
    • Ports: HTTPS (443 outbound) - minimal firewall configuration
    • Connectivity: Cloud-native via Viasys platform
    • Bandwidth: 2-6 Mbps per camera stream (varies by resolution)
  • Known Considerations:
    • Cloud-first architecture - Reduced on-premise hardware requirements
    • Simplified setup - Minimal network configuration needed
    • Cloud storage options - Local and cloud recording supported
    • Remote access - Built-in cloud streaming without port forwarding
    • Multi-site capable - Manage multiple locations from single platform
    • Integration profiles - Pre-configured feature sets
    • IO support - Physical alarm input/output integration
    • Mobile optimized - Cloud streaming optimized for mobile devices
    • Scalable - Supports 4 to 16 camera channels per NVR

Supported Features​

Core Functions​

Feature CategoryFeatureStatusNotes
Discovery & SetupAuto-Discovery✓Cloud-based auto-discovery
Manual Configuration✓Manual setup also supported
Cloud CapabilitiesLive Streaming (Cloud)✓Primary streaming mode
Playback (Cloud)✓Cloud video playback
Timeline (Cloud)✓Event timeline navigation
Events & AlarmsEvent Detection✓Motion, analytics, system alerts
Arm/Disarm✓Camera-level and system-level
Advanced FeaturesPTZ/Presets✓Full PTZ control
Genesis Audio (SIP)✓Two-way audio communication
I/O Control✓Alarm input/output support
Timelapse○Partial support for timelapse
Integration ProfilesBasic Profile✓Essential features pre-configured
Basic+ Profile✓Enhanced features pre-configured

Legend: ✓ Supported | ○ Partial Support | ✗ Not Supported

Integration Highlights:

  • Cloud-native architecture - Minimal on-premise infrastructure
  • Simplified deployment - Quick setup with cloud provisioning
  • Remote monitoring - Cloud streaming without port forwarding
  • Multi-site management - Centralized management across locations
  • Integration profiles - Pre-configured Basic and Basic+ options
  • Genesis Audio (SIP) - Two-way audio communication
  • PTZ control - Full pan, tilt, zoom functionality
  • IO integration - Physical alarm sensors and outputs
  • Event management - Intelligent event detection and notification
  • Mobile-optimized - Cloud streaming for mobile devices
  • Scalable - Support for small to medium deployments
  • Secure - Cloud-based with minimal firewall configuration

Quick Start​

To configure Viasys/ShieldBox Cloud NVR with GCXONE:

  1. Setup Cloud Account - Create or access Viasys/ShieldBox cloud account, ensure NVR is registered
  2. Configure Network - Connect NVR to network with internet access (minimal configuration required)
  3. Add to GCXONE - Register Viasys/ShieldBox cloud NVR in GCXONE platform using cloud credentials
  4. Select Integration Profile - Choose Basic or Basic+ profile for feature set
  5. Configure Cameras and Events - Map cameras, configure event forwarding and notifications
  6. Verify Integration - Test live streaming, playback, timeline, and event functions

Estimated setup time: 25-35 minutes

For detailed step-by-step instructions with screenshots, see the Configuration Guide.

Change Log​

  • 2025-12-20 v1.0.0 - Initial GCXONE documentation

Need Help?

If you need assistance with Viasys/ShieldBox Cloud NVR integration, check our Troubleshooting Guide or contact support.