Mobotix IP Camera
Device Information:
- Device: IP Camera
- Vendor: Mobotix
- Model: Various Mobotix IP Camera Models
- Firmware: MxPEG firmware 4.x or higher recommended
- Platform: GCXONE
- Doc Version: 1.0.0
Summary
- Purpose: High-quality IP cameras with decentralized architecture and weatherproof German engineering for demanding environments.
- Outcome: Cloud integration with live video, events, arm/disarm, and Genesis Audio using MxPEG codec.
- Audience: Technical Installers / Field Engineers / Support
Prerequisites
Before you begin, ensure you have:
- Mobotix IP camera with latest firmware
- Administrative access to Mobotix camera web interface
- Network connectivity between camera and GCXONE platform
- GCXONE account with device configuration permissions
- Static IP or DHCP reservation configured for camera (recommended)
- Firewall allows required ports (HTTP, HTTPS, RTSP)
Device Profile
- Type: IP Camera - Decentralized Architecture
- Discovery Protocol: ONVIF / Manual IP configuration
- Event Types: Motion detection, tampering, audio detection, PIR sensor events (select models), network loss, storage alerts
- Network Requirements:
- Ports: HTTP (80), HTTPS (443), RTSP (554)
- Connectivity: Direct IP with cloud integration
- Bandwidth: 0.5-3 Mbps per camera (MxPEG codec optimized)
- Known Considerations:
- Decentralized architecture - On-camera processing and storage
- MxPEG codec - Proprietary codec optimized for low bandwidth
- Built-in storage - Cameras include microSD card slot
- Weatherproof - Designed for extreme temperatures (-40°C to +65°C)
- Dual sensor models - Some models have dual optical sensors
- Audio support - Built-in microphone and speaker on many models
- ONVIF Profile S - Standard ONVIF compatibility
- PoE powered - Power over Ethernet support
- German engineering - High build quality and reliability
Supported Features
Core Functions
| Feature Category | Feature | Status | Notes |
|---|---|---|---|
| Discovery & Setup | Auto-Discovery | ✓ | ONVIF discovery supported |
| Manual Configuration | ✓ | IP-based configuration | |
| Cloud Capabilities | Live Streaming (Cloud) | ✓ | Cloud streaming via GCXONE |
| Events & Alarms | Event Detection | ✓ | Motion, tampering, audio detection |
| Arm/Disarm | ✓ | Camera-level arming | |
| Advanced Features | Genesis Audio (SIP) | ✓ | Two-way audio communication |
Legend: ✓ Supported | ○ Partial Support | ✗ Not Supported
Integration Highlights:
- Decentralized architecture - On-camera intelligence and storage
- MxPEG codec - Bandwidth-optimized streaming
- ONVIF compatibility - Standard protocol support
- Built-in storage - Local recording on microSD card
- Genesis Audio (SIP) - Two-way audio communication
- Event detection - Motion, tampering, audio alerts
- Arm/disarm functions - Camera-level security control
- Weatherproof design - Extreme temperature operation
- German quality - Reliable hardware and firmware
- Low bandwidth - Optimized for remote locations
Quick Start
To configure Mobotix IP Camera with GCXONE:
- Configure Camera Network - Access camera web interface, configure static IP or DHCP, verify network connectivity
- Enable ONVIF/Cloud Integration - Enable ONVIF service, create integration user with full permissions
- Add to GCXONE - Register camera in GCXONE using IP address and credentials
- Configure Events and Audio - Set up motion detection, arm/disarm, and Genesis Audio (SIP) if required
- Verify Integration - Test live streaming, event detection, and audio functions
Estimated setup time: 15-20 minutes
For detailed step-by-step instructions with screenshots, see the Configuration Guide.
Related Articles
- Mobotix IP Camera Configuration
- Mobotix IP Camera Troubleshooting
- Firewall Configuration
- Required Ports
- Standard Device Onboarding Process
Change Log
- 2025-12-20 v1.0.0 - Initial GCXONE documentation
Need Help?
If you need assistance with Mobotix IP Camera integration, check our Troubleshooting Guide or contact support.